• We have upgaded to the latest version of XenForum and the process finished without any errors!!!! Enjoy the new forum!

Search results

  1. S

    BSD - resets all the time

    I would check the solder on the bridge rectifiers on the power/driver board perticularly the two under the silver heat sink BR1/BR2. I had a similar issue and replacing the BR2 was the solution. There is a hack that you can do to raise the 5v also but its best to get to the root of the...
  2. S

    Do you let pre-schoolers play your pins?

    If I was worried about the little ones I would get a keyed power switch. Richard
  3. S

    WTB 2x 2" White Mini flipper

    I am looking to replace the upper two flippers on my classic stern lightning. They are a basic bally looking white flipper. I can't seem to find one online. Thanks Richard
  4. S

    [FOUND]: WTB Twilight Zone flipper opto board

    Re: WTB Twilight Zone flipper opto board ASAP no longer needed. I sacraficed a type 2 board for its opto's. Richard
  5. S

    [FOUND]: WTB Twilight Zone flipper opto board

    Re: WTB Twilight Zone flipper opto board ASAP They don't have all the parts to do the swap (i think) i can't find the blue steel spring but they might still have it. I will have to give them a call monday and see. Worst case I could pull the opto's and put them on the type 1 board. I am...
  6. S

    [FOUND]: WTB Twilight Zone flipper opto board

    I am in dire need of a flipper opto board (type 1) for a friends Twilight zone. I would also take a type 2 if it comes as a complete assembly with the opto interrupter and whatever needed to mount it. I would also take a bare opto if anyone has a original spec one. I am in oshawa but travel...
  7. S

    WTB: Ground braid

    I have the braid now sorry for the delay. I am going to cut it up sunday and get it out to whoever was interested. I am crossing toronto 4-5pm monday and can drop off or make other arrangements. I remember before the server crash there was a phil in ottawa interested in some braid. If you...
  8. S

    WTB: Ground braid

    I am looking for some ground braid, enough to do one machine. I am talking about the 1/4" wide braid not the small braid used for the lights. I found a supplier for a 500ft roll at $140+shipping from quebec if anyone wants to split on a big roll. I am in oshawa but would travel around the GTA...
  9. S

    Habco ESM10 Coke fridge (glass front)

    I have a commercial coke fridge, its a 2/3 height fridge its about 5 ft tall. It's a habco ESM10. There are 3 shelves and it could hold probably 100 beer. There are some minor condition issues but overall it shows and works well. Looking for $300 or trade toward a pinball or even a beatup...
  10. S

    Sun Polishing & Plating Company

    I might have a lead through work. We use a fab shop that does electropolishing on stainless. They make custom stainless steel stuff for us. Anything polished is electropolished and it comes out shiny new. I can take a pic of the end result. Richard
  11. S

    Ultra Rare or just a scam? I say BS (link)

    My firepower has flaked to almost that point. I don't know enough about alien poker but I would not believe it. edit: after a quick look at what a alien poker is supposed to look like I would say without a doubt this is a flaked off glass. Richard
  12. S

    WTB Firepower backglass

    Still looking. Richard
  13. S

    The Pinball Diaries (what did you do today?)

    I'm working on a quicksilver project..... Photos speak for themselves :) this is my first cabinet repaint so I want to start with high standards. It's still in progress but here is a teaser. Does anyone know the paint code for the grey paint on the cabinet for quicksilver? My paint match was not...
  14. S

    WTB early Bally ss head / six million dollar man glass

    I am no longer looking for this, thanks dan!! Richard
  15. S

    WTB early Bally ss head / six million dollar man glass

    I am looking for a 6 million dollar man head or any early Bally ss head, I don't need the boards just the shell and back glass. Thanks! Richard
  16. S

    SOLD Free High Speed Cab [GONE]

    Re: FREE : High Speed Cab Thanks alot Grant! Hopefully this will fit all my quicksilver parts. I will definatly post up some pics when its all said and done. Richard
  17. S

    SOLD Free High Speed Cab [GONE]

    Re: FREE : High Speed Cab I would take it depending on where you are. Richard Edit: I see your in Mississauga I defiantly want it.
  18. S

    Shipping Classes??? what a pain...

    here is a freight class calculator: http://www.freightquote.com/howtoship/n ... nsity.aspx it its all based on density it looks like. Richard
  19. S

    Corrosion is bad, right?

    I fixed a baby pacman board that was worse than that. I personally would try. But it's a fair amount of work. Richard
  20. S

    willliams flash soundboard

    I would think it's the roms. I had weird issues with firepower until I flashed the roms again. The 4700 works fine for me in my flash board and it had the 12000 originally. Richard