1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Gorgar Voice troubles

Discussion in 'Pinball Tech Support' started by slither, Mar 7, 2021.

  1. slither

    slither Member

    Joined:
    Mar 23, 2013
    Messages:
    222
    Likes Received:
    6
    Location:
    Portland, Ont.
    Sooo, my Gorgar has been acting up again. All game sounds work great, but speech is very static filled. If I turn the blend pot on sound board down to straight game sounds, no voice,its fine, turn it up to voice and lots of static. Very annoying, Any thoughts?. I have reflowed solder on speech board and connectors of sound board, re seated cables, etc. Checked pins and connections...Any ideas appreciated. Thanks !!.. Also have checked grounds etc.
     
    #1
  2. steamfitter

    steamfitter New Member

    Joined:
    May 11, 2015
    Messages:
    23
    Likes Received:
    0
    Location:
    Orleans , canada
    Check the mpu interconnect male pins for cold solder joints and if the the interconnect of the driver board might need to be replaced if it's original
     
    #2
  3. slither

    slither Member

    Joined:
    Mar 23, 2013
    Messages:
    222
    Likes Received:
    6
    Location:
    Portland, Ont.
    yep it looks original , will look after work..Thanks !!
     
    #3
  4. slither

    slither Member

    Joined:
    Mar 23, 2013
    Messages:
    222
    Likes Received:
    6
    Location:
    Portland, Ont.
    Reflowed solder on all interconnect joints, Gorgar speaks again...Thank you !
     
    #4
  5. steamfitter

    steamfitter New Member

    Joined:
    May 11, 2015
    Messages:
    23
    Likes Received:
    0
    Location:
    Orleans , canada
    Great job
    Your welcome
     
    #5

Share This Page