Here is a game you don't see very often with 2,416 units made back in 1995. Bally's Whodunnit...a family friendly pinball with a 1940's style murder mystery game theme. The light show and music are both spectacular.
I've only had it since the summer but have to move it on to make some room.
I cleaned it inside and out but it was VERY clean to begin with.
The cabinet shows typical scrapes from being on route at some point in its life...but the beautiful playfield looks like it wasn't played very much wherever it lived before.
*PF is very clean - no wear
*Game works 100%
*Mechs under pf very clean
*Cab has a few small dings, biggest 'flaw' would be the chip out of the lower front cabinet
*Translite is really nice but has a couple of very small spots (See last photo)
*Original CPU Board returned to 100% by Brent at ToMMy Pinball
*NVRAM installed - no worrying about batteries
*Latest ROM updates from Dave at Pinballrom.com
*Playfield plastics are all perfect and included is an extra set of slingshot plastics
*Rubbers were recently replaced and look good
*Ramps are all good
*I completely LED'd the game with 1SMD in the backbox, 2SMD in the inserts including LED flashers and GI done with warm white - also LED'd the coin slots and start buttons
*Original Manual (VERY hard to find - bought and shipped this one from California)
*NEW balls
*NEW legs
*NEW leg levelers
*NEW leg bolts
*NEW blue cab protectors
*NEW green superbands flipper rubbers
*NEW laminated apron cards
Ground level easy loading from my garage no stairs.
$6200
Let me know if you want more photos or video.
Thanks!
I've only had it since the summer but have to move it on to make some room.
I cleaned it inside and out but it was VERY clean to begin with.
The cabinet shows typical scrapes from being on route at some point in its life...but the beautiful playfield looks like it wasn't played very much wherever it lived before.
*PF is very clean - no wear
*Game works 100%
*Mechs under pf very clean
*Cab has a few small dings, biggest 'flaw' would be the chip out of the lower front cabinet
*Translite is really nice but has a couple of very small spots (See last photo)
*Original CPU Board returned to 100% by Brent at ToMMy Pinball
*NVRAM installed - no worrying about batteries
*Latest ROM updates from Dave at Pinballrom.com
*Playfield plastics are all perfect and included is an extra set of slingshot plastics
*Rubbers were recently replaced and look good
*Ramps are all good
*I completely LED'd the game with 1SMD in the backbox, 2SMD in the inserts including LED flashers and GI done with warm white - also LED'd the coin slots and start buttons
*Original Manual (VERY hard to find - bought and shipped this one from California)
*NEW balls
*NEW legs
*NEW leg levelers
*NEW leg bolts
*NEW blue cab protectors
*NEW green superbands flipper rubbers
*NEW laminated apron cards
Ground level easy loading from my garage no stairs.
$6200
Let me know if you want more photos or video.
Thanks!
