• We have upgaded to the latest version of XenForum and the process finished without any errors!!!! Enjoy the new forum!

3D Printers and Pinball

Chris Bardon

Chris Bardon

Well-Known Member
Nov 15, 2012
1,346
189
63
Mississauga, ON
Fifty said:
Ha ha! Ya, I'm definitely showing my age here. Let me just put away my punch tool.
Click to expand...
Can go right next to the butt set?

Technically reverse engineering that stuff would probably voilate their new EULA, but I don't think anyone is really going to care. For now, I'm just waiting to see if they add anything else useful to the games beyond achievements, basic score tracking, and auto-filling HS initials.
 
necro_nemesis

necro_nemesis

Active Member
Nov 20, 2012
196
34
28
Newmarket, Ontario. Canada
Coitusmysterioso

Coitusmysterioso

Active Member
Jan 13, 2017
202
27
28
46
Shelburne, Ontario
mwong168 said:
Nice and can you explain what and why you did some of your mods?
Click to expand...
Lets see off the top of my head...

• 12U Server Cabinet for enclosure (more stable print temps and piece of mind for fire safety)

• Remote mount the controls and PCB outside of the enclosure (cooling and ease of use)

• TH3D EZ Board V1 (upgraded to a 32 bit board silent board, great aftermarket board with easy firmware updates)

• TH3D EZABL capacitive Auto Bed Level system (no bed adjustments required)

• TH3D EZOut Filament Sensor

• Meanwell Power Supply (much more stable better built power supply)

• Solid Bed Mounts (ABL system doesn't require any adjustment)

• Dual Z Lead Screws (Eliminates X gantry sagging)

• Upgraded Lead Screw Coupler

• Upgraded Lead Screw Nuts

• High Amp MOSFETs (using external mosfets removed the large electrical loads from the main PCB)

• 5015 Fan & Petsfang Blokhead Fan duct (much better print cooling for higher speeds and bridging large gaps)

• Tough PTFE Fittings

• Tough Tube

• Aluminum Extruder (obvious weakness in the stock design)

• Plus a LONG list of others I made myself
 
  • Like
Reactions: mwong168
necro_nemesis

necro_nemesis

Active Member
Nov 20, 2012
196
34
28
Newmarket, Ontario. Canada
Coitusmysterioso said:
Can't believe I just saw this 3d printing post. Here's my heavily modified Ender 3.
Click to expand...
I had similar upgrades on my first printer which was cartesian then started from scratch again with a corexy and modded again from there. Other than the printer itself the biggest upgrades were writing, compiling and flashing customizing Marlin firmware for a BLTouch adding in auto bed levelling and silent steppers. Hardware wise I just needed to replace the steppers on the board and install the touch sensor but I kind of started out with what I was looking for the second time buying a printer. If I was going to go any further it would be with a really good hot end but I haven't had any major issues with the one on there.
 
lemmings418

lemmings418

Member
Jun 27, 2021
31
3
8
53
Hamilton
Hi all,

Anyone know of cost effective 3D printing services here in Canada for a simple one off piece?

They seem to be everywhere in the US.

Looking to get a piece made to eliminate the pops ball trap on a GnR LE.

Thanks.
 
C

Corrie

Active Member
Oct 2, 2021
174
69
28
39
Mississauga, Ontario
lemmings418 said:
Hi all,

Anyone know of cost effective 3D printing services here in Canada for a simple one off piece?

They seem to be everywhere in the US.

Looking to get a piece made to eliminate the pops ball trap on a GnR LE.

Thanks.
Click to expand...

There aren't a lot of options for one off pieces that make sense financially especially if you need it to be modeled as well.
Do you already have the 3d model or does it need to be made? And do you have pictures of it?
If it's simple enough and you have a drawing with dimensions I could probably do it for you, but I would need to see first since I can't promise I'd be able to model it without seeing it.
 
mwong168

mwong168

Administrator
Staff member
Nov 14, 2012
6,684
1,459
113
46
Toronto
lemmings418 said:
Hi all,

Anyone know of cost effective 3D printing services here in Canada for a simple one off piece?

They seem to be everywhere in the US.

Looking to get a piece made to eliminate the pops ball trap on a GnR LE.

Thanks.
Click to expand...

If you have the STL file let me know what color you'd like (assuming I have it) and I can print for you.
 
lemmings418

lemmings418

Member
Jun 27, 2021
31
3
8
53
Hamilton
Corrie said:
There aren't a lot of options for one off pieces that make sense financially especially if you need it to be modeled as well.
Do you already have the 3d model or does it need to be made? And do you have pictures of it?
If it's simple enough and you have a drawing with dimensions I could probably do it for you, but I would need to see first since I can't promise I'd be able to model it without seeing it.
Click to expand...
There is an STL file on thingverse (see next post).
 
C

Corrie

Active Member
Oct 2, 2021
174
69
28
39
Mississauga, Ontario
lemmings418 said:
Thanks.

The STL file in on thingverse.

www.thingiverse.com

Ball Saver on the Bumper from Guns and Roses JJP Pinball by agima2000

Ball Saver
www.thingiverse.com www.thingiverse.com

Two in black would be great.

I would like to pay for them and shipping as well as something for your time.

Thanks.
Click to expand...
There's two sizes so not sure which one you need but it's a small, simple print so I could print you 4 of each and you'd have the right size and some spares in case of breakage. Would be less than 2 hours to print them all. If you want to measure the post we could print the correct size, unfortunately the thingiverse page doesn't explain why there are two sizes so not sure how you know which one you need.

It's such little material I'd be fine with $5 plus shipping. I don't have many excuses to use my printer these days so always looking to use it.
It's such a simple file though either myself or mwong should have no problem providing it.



1659727193876.png
 
lemmings418

lemmings418

Member
Jun 27, 2021
31
3
8
53
Hamilton
Was researching the differences between the two on Pinside.

Apparently the first file uploaded could rip at the post due to materials used for the print/violence of the ball hitting it.

The second file (bumperpostbiger.stl) just thickened the wall material around the post.

The inner diameter should be the same.

I would use bumperpostbiger.stl.

Looks like there are two offers here. My cup runeth over. :)

Would be looking for a few (2-4 I guess) of bumperpostbiger.stl in black.

Corrie or mwong168, I would accept either offer.

Located at L8E5W5 for shipping costs. Can do Paypal or E-transfer. Whatever is easiest.

Thanks all.
 
mwong168

mwong168

Administrator
Staff member
Nov 14, 2012
6,684
1,459
113
46
Toronto
lemmings418 said:
Was researching the differences between the two on Pinside.

Apparently the first file uploaded could rip at the post due to materials used for the print/violence of the ball hitting it.

The second file (bumperpostbiger.stl) just thickened the wall material around the post.

The inner diameter should be the same.

I would use bumperpostbiger.stl.

Looks like there are two offers here. My cup runeth over. :)

Would be looking for a few (2-4 I guess) of bumperpostbiger.stl in black.

Corrie or mwong168, I would accept either offer.

Located at L8E5W5 for shipping costs. Can do Paypal or E-transfer. Whatever is easiest.

Thanks all.
Click to expand...
Printed you 4 and will ship out to you tomorrow.

Mike
 
  • Like
Reactions: IVPinball
lemmings418

lemmings418

Member
Jun 27, 2021
31
3
8
53
Hamilton
Hi all,

I want to publicly thank Mike for hooking me up with the GnR pop bumper ball trap part.

He went above and beyond after Canada Post ate TWO packages he kindly sent.

A real stand up guy for the community.

Thanks Mike.

Rick
 
mwong168

mwong168

Administrator
Staff member
Nov 14, 2012
6,684
1,459
113
46
Toronto
lemmings418 said:
Hi all,

I want to publicly thank Mike for hooking me up with the GnR pop bumper ball trap part.

He went above and beyond after Canada Post ate TWO packages he kindly sent.

A real stand up guy for the community.

Thanks Mike.

Rick
Click to expand...
No problem and had I known you come nearby my house for work regularly I wouldn't have bothered mailing and left in my mailbox. Sorry it took you almost 2 months to get these parts and hope they work.

Mike
 
You must log in or register to reply here.
Top Bottom