(fixed) How to remove Elvis upper PF?

[BMHouze]

Swapping out the rubber on Elvis.
The lower pf was pretty straight forward with only a few minor passing issues.
I just can't see how to remove the upper pf to get to the rubber underneath.
Not sure how much teardown it will take.
Should I be removing the wire forms or will they just pull off when I figure out the right bolts/screws?
Am I going to have to pull the ramps up to get space to work?
I will dig into the manual deeper but it's looking like a real pain in the ass to get it off.

 

[BMHouze]

Well, I had to remove the flipper and the wire forms to get the pf off.
I have 1 screw that goea from the bottom up so it is going to be a very tight fit to get back in.
What a total pain.
Been at it over 2 hoira for rubber....
Finished after 3.5 hours. Spun around the rubber under the hotel.
I was not going to tear the machine down more.
Back together and test playing.