"Original" Inside Decals for sale by Hassanchop

[mwong168]

ALL the art is original hand drawn from scratch. No shutterstock crap.

All the art was designed with the playfield elements in mind. Guides were used so the key elements of the art can interact with the ramps, plastics, objects, etc in the correct spots.

*** Get ORIGINAL art designed by real artists ***

The panels are produced with super strong scratch resistant vinyl.

$60usd each shipped with tracking number.


Terminator 2

Theatre of Magic

Scared Stiff

Judge Dredd

Fishtales

Congo

Creature from the Black Lagoon

Bram Stoker's Dracula

pinside link:
https://pinside.com/pinball/forum/topic/original-inside-decals-60-shipped

 

[Menace]

These look pretty good, and the price is right. Too bad he doesn't offer any for games in my lineup...

D

 

[Beafraid]

Is there a link for website?

 

[mwong168]

Hassanchop has been around the pinball community for a while now and I remember first crossing paths with him back in 2009-2011 on the hyperpin and vp forums. He helped a lot of VP table designers out with his artistic talents and he even paired up with jpsalas and made his own original Scarface Balls and Power VP table too!

He's also been fairly active over the years in documenting the redrawing of original cabinet artwork. I don't know if he reproduces these for sale or not but I'm sure he could help someone out who likes to restore non A list games.

Gilligan's Island
https://pinside.com/pinball/forum/topic/gilligans-island-cabinet-decals-restoration

Demolition Man
https://pinside.com/pinball/forum/topic/demolition-man-cabinet-decals-restoration

The Sopranos
https://pinside.com/pinball/forum/topic/sopranos-cabinet-decals

Congo
https://pinside.com/pinball/forum/topic/congo-cabinet-decals

Star Trek The Next Generation
https://pinside.com/pinball/forum/topic/sttng-cabinet-decals-revisited

No Fear
https://pinside.com/pinball/forum/topic/no-fear-cabinet-art-redraw

The X-Files (custom)
https://pinside.com/pinball/forum/topic/x-files-custom-cabinet-decals

These look pretty good, and the price is right. Too bad he doesn't offer any for games in my lineup...

I'm not sure what his affiliations is with pinballpt.com (but I will ask) because they offer some of his artwork for sale as well. Maybe he also helped create some of the other ones like

http://www.pinballpt.com/prestashop/6-sideboard-decals

I know on pinside he has also made the follow inner decals that were not mentioned in his posting above

 

[mwong168]

Is there a link for website?

hassanchop just pm'd me on pinside and will be joining on here shortly so people can PM him with questions or orders.

 

[hassanchop]

Hi all. Thank you mwong168 for inviting me to this forum

This was an ad only for the decals that have a massive hand drawing work, as well as a extensive use of guides to know where the art is gonna go on the machine. Using these guides the art is placed in places to interact with the machine in a custom way. This makes the decals feel like they were made during it's production back in the day.

PM me for more info.

I also have inside decals for: TRS, Stern NBA, BOP, NF, CV, ACDC, MET, RS, JM, STTNG, Stern ST, IM, CSI, TOTAN.
TRS:
NBA:
BOP:
NF:
CV:
ACDC:
MET:
RS:
JM:

 

[mwong168]

Here are some pics of the decals available for sale installed in actual games:

 

[hassanchop]

Wow you guys are fast hahah

I do the art for pinballpt. I also sell the decals myself, but I order to them and ship. My price is lower right now because as I'm only one person handling things I can cut the price a little. This makes 60$ shipped each

I wanted to upload the rest of the pics of the insides, but there's some error on the upload system right now. Will upload later.

 

[mwong168]

 

[mwong168]

Hi all. Thank you mwong168 for inviting me to this forum

Welcome to PBREV and thanks for clarifying your relationship with pinballpt.

I see in the past you have done some original and custom cabinet artwork. Are they for sale and do you have a listing of what you officially have available and can you tell us more about the finish?

 

[hassanchop]

I have done many many cabinet restores. I have done graphic restorations on almost all Bally Williams from the 90's. But I don't have the rights to sell them so I can't post for sale. For more info pm me.

Customs I only made x-files

 

[stiffler4444]

Looks amazing...now if someone only wanted to do up some Sopranos work......that machine needs some Bada Bing Bling.......

 

[BMHouze]

So is this like a cabinet mylar/sticker?
Do I have to remove my playfield to apply it?
A nice Vegas skyline (each side of the street) would look cool in Elvis.
Unsure if current or classic Vegas would be more appropriate/popular.

 

[hassanchop]

So is this like a cabinet mylar/sticker?
Do I have to remove my playfield to apply it?
A nice Vegas skyline (each side of the street) would look cool in Elvis.
Unsure if current or classic Vegas would be more appropriate/popular.

It's a sticker vinyl like the cabinet ones, but with a stronger lamination.
You can apply the decals without removing the pf. But I strongly recommend that you do.
I made a guide a while back: https://www.dropbox.com/s/qczygxf4w7805ch/pinballpt inside decals installation guide 2.pdf?dl=0

 

[mwong168]

I received my package today in the mail. Thanks again hassanchop!



I will post more pics once I install them in my games.

 

[mwong168]

The install went pretty smooth tonight and I kept the playfield inside the cab.

One down...





two more to go...

 

[Chris Bardon]

These are kind of a pain to install, but I like them better than mirror blades. The ones I got for TSPP are awesome!

 

[dnewman]

That's an awesome looking set for Judge Dredd! The Congo and CFTBL should look great too!

Yeah, I've got the set for my TSPP as well, and it's probably the best mod you can put on that pin!

 

[mwong168]

These are kind of a pain to install, but I like them better than mirror blades. The ones I got for TSPP are awesome!

I started installing these at around 11:30pm last night and I was done by 11:55pm. I got some great advice and pointers from budfan and quartergrabber a few days ago as both have installed them successfully in their games with the playfield left in. I don't have much room to work with as is and also not comfortable pulling the playfield out of the cab myself without someone with experience to help. It was a good thing I had a scrap scratched up mirror blade so I was able to trace and trim out the excess on the front and back end of the decal. I know in hassanchop's instructions he trims them during the application process but that's because he pulls the playfield out.

Anyways, once trimmed I lifted the playfield in the upright position, used an allen key to remove the hinge bolts and then proceeded to slide the decal in between the cab. Once I had the back end of the decal lined up I used some clamps to hold the front end against the cab and lined up to top. Now I pulled the back end of the decal out and away from the cab so I could make a cut to separate the peal off backing from the front end. I line up the back end of the decal once again and applied to the inside of the cab. I used a small soft towel to apply pressure to the decal and pushed out any bubbles by hand. Now that the back 1/4 of the decal was securely applied to the cab I was able to remove the clamps and backing to start applying the front end of the decal. I lined up the top edge first before smoothing the rest of the decal down. Then used an exacto knife to cut out the holes and reinstalled the hinge bolts.

The first side took me longer to apply because I was a bit nervous and learning as I was going and the second side took me like 2 minutes.

 

[mwong168]

That's an awesome looking set for Judge Dredd! The Congo and CFTBL should look great too!

Thanks and if you want next time when I come over I can bring you the scrap mirror blade I used to trim the decal so you don't have to worry about doing it in game while applying.