For sale (Located in Orleans - Ottawa)
POTC JJP Limited Edition #440
Home use only. Under 400 "completed" games, under 700 "started". ~1200 balls played.
It is absolutely loaded with mods, I will try to list them but will probably be forgetting some. I also have about 5 that aren't installed (side art blades, ship ramp protector, about 3-4 more).
Asking 30k OBO. I know it's not cheap but it's probably the nicest POTC you will see, there is zero issues, and I had a friend sell a beat up one, with multiple mech problems and with 0 mods for 25, so...
I am open to trade as well but I'd really like to limit it to 1 machine coming back, but having said that if I had a mind blowing offer I couldn't say no to...
Some of the games I'm interested in:
Avengers AIQ (any trim)
Elvira (any trim)
Rick & Morty
Iron Maiden (any trim)
BK SOR PRO
Star Wars PREM / LE
Star Trek (any trim)
Mandalorian (any trim)
There's probably more, but those are the ones I definitely am interested in more than others...
***MOD LIST***:
Full Cliffy protection set
Limited Edition (100 made?) ship by Lior
Lock bar upgrade art by Lior
Replacement "plastics" by Lior (limited)
Monkey on ship
Chest Lid open / close
Spinning Disc Silencer (a must)
Custom Made subway ramp that allows steeper pin setup (made myself via 3d printing)
Side Blades (uninstalled)
XXX Rum Barrell
Davey Jones statue
Custom shooting knob (not installed)
Ship Rope ladder
Rum Barrell Drink Holder for HUGE jugs of pirate ale!
Pirates be warned shooter rod decoration
... and more I'm sure I'm forgetting a few at least
I should mention too this won't be a quickie one and done unless you have a mover (or straps onhand and are pretty adept at moving 400 lb machines in tight spaces). I have a tight staircase going to the basement (for a widebody, anyways) and this thing ain't moving without some serious know how. I hired movers to get it down there, was the only pin I ever had to do that for...
Also note, there is a technician alert for one of the ship flippers (left), I have *NEVER* had a single issue with anything working properly and I've had 2 people who have been in the hobby 20+ years to take a look and both have said it's a false positive. To get rid of it you could probably take the ship out (there's 2 mods to put in at the same time!), but that's an all day task lol. You can come play 20 games at my house if you want you won't have any issue, it's been on for literally 2 years.
POTC JJP Limited Edition #440
Home use only. Under 400 "completed" games, under 700 "started". ~1200 balls played.
It is absolutely loaded with mods, I will try to list them but will probably be forgetting some. I also have about 5 that aren't installed (side art blades, ship ramp protector, about 3-4 more).
Asking 30k OBO. I know it's not cheap but it's probably the nicest POTC you will see, there is zero issues, and I had a friend sell a beat up one, with multiple mech problems and with 0 mods for 25, so...
I am open to trade as well but I'd really like to limit it to 1 machine coming back, but having said that if I had a mind blowing offer I couldn't say no to...
Some of the games I'm interested in:
Avengers AIQ (any trim)
Elvira (any trim)
Rick & Morty
Iron Maiden (any trim)
BK SOR PRO
Star Wars PREM / LE
Star Trek (any trim)
Mandalorian (any trim)
There's probably more, but those are the ones I definitely am interested in more than others...
***MOD LIST***:
Full Cliffy protection set
Limited Edition (100 made?) ship by Lior
Lock bar upgrade art by Lior
Replacement "plastics" by Lior (limited)
Monkey on ship
Chest Lid open / close
Spinning Disc Silencer (a must)
Custom Made subway ramp that allows steeper pin setup (made myself via 3d printing)
Side Blades (uninstalled)
XXX Rum Barrell
Davey Jones statue
Custom shooting knob (not installed)
Ship Rope ladder
Rum Barrell Drink Holder for HUGE jugs of pirate ale!
Pirates be warned shooter rod decoration
... and more I'm sure I'm forgetting a few at least
I should mention too this won't be a quickie one and done unless you have a mover (or straps onhand and are pretty adept at moving 400 lb machines in tight spaces). I have a tight staircase going to the basement (for a widebody, anyways) and this thing ain't moving without some serious know how. I hired movers to get it down there, was the only pin I ever had to do that for...
Also note, there is a technician alert for one of the ship flippers (left), I have *NEVER* had a single issue with anything working properly and I've had 2 people who have been in the hobby 20+ years to take a look and both have said it's a false positive. To get rid of it you could probably take the ship out (there's 2 mods to put in at the same time!), but that's an all day task lol. You can come play 20 games at my house if you want you won't have any issue, it's been on for literally 2 years.
Attachments
-
machine off.jpg117.4 KB · Views: 78
-
fullpf3.jpg169.5 KB · Views: 75
-
main.jpg145.7 KB · Views: 75
-
fullpf1.jpg158.5 KB · Views: 73
-
fullpf2.jpg160.7 KB · Views: 68
-
left pf.jpg153.8 KB · Views: 70
-
game stats.jpg103.7 KB · Views: 69
-
upper left pf.jpg139.1 KB · Views: 68
-
upper right pf.jpg158.7 KB · Views: 62
-
lower right pf.jpg113 KB · Views: 74