I see that pitch and bats don't get much love, but I really enjoy them and they make for fun competitions. I also like shakers. I figured it wouldn't be too hard to add one to my game and here is how I did it:
Materials Used:
Shaker Motor Kit (Rev B) for Most Stern SAM System Games $90 USD
Gaeyaele Delay Time Electronic relay w/din rail - $35 CAD (amazon)
DC 12V coil electromagnetic power relay - $20 CAD (amazon)
Misc. 18ga wire
I was hoping to avoid using the 12v relay and just get the S(ignal) from the 5v LED homerun flasher, but the voltage flash was too quick/low to trigger the timer. I added the relay with a 12v source off the main board, using the 5v LED flasher to trigger the relay, triggering the timer. If you wanted multiple triggers, you could use a lead with a diode and utilize other triggers into the relay. In all, this was easy and would do it again. Every homerun now shakes with the crowd !
Materials Used:
Shaker Motor Kit (Rev B) for Most Stern SAM System Games $90 USD
Gaeyaele Delay Time Electronic relay w/din rail - $35 CAD (amazon)
DC 12V coil electromagnetic power relay - $20 CAD (amazon)
Misc. 18ga wire
I was hoping to avoid using the 12v relay and just get the S(ignal) from the 5v LED homerun flasher, but the voltage flash was too quick/low to trigger the timer. I added the relay with a 12v source off the main board, using the 5v LED flasher to trigger the relay, triggering the timer. If you wanted multiple triggers, you could use a lead with a diode and utilize other triggers into the relay. In all, this was easy and would do it again. Every homerun now shakes with the crowd !