WTB Shooter Lane Protectors - I want some, anyone else??

[ZoomZoomBoomBoom]

Here's a pic of the version I can print.

 

[Paul]

I would like to be added to the list of “yes please”. Figure I have 4 machines so 6 would be ideal if one or two should have a failure.

unrelated and not that I would want to be an importer but I do spend plenty of time at my place in the USA… parcels would be opened prior to transit but im pretty sure I could help the community out.

Here's a pic of the version I can print.View attachment 34343

Will these work with the older sterns like TSPP, Spider-Man etc ? If not will you be able to print them as well ? Thanks

 

[ZoomZoomBoomBoom]

Will these work with the older sterns like TSPP, Spider-Man etc ? If not will you be able to print them as well ? Thanks

I don't know, but I will find out!

 

[Chris Bardon]

Is that the same as this stl? https://www.thingiverse.com/thing:6860342

 

[ZoomZoomBoomBoom]

Is that the same as this stl? https://www.thingiverse.com/thing:6860342

I think so

 

[pinballjah]

I be interested in some if they are not like the ones they sell on Pinside. Personally I like the clear ones from Pinball Life. Those work great and you don't have to take the playfield apart to install them. Thanks.

 

[Game Room]

I would be in for a dozen

 

[Chambahz]

Even better if you were order a couple hundred Cliffy lane protectors and had them available!
Shipping is always a massive cost increase so even if you charged a solid premium for each one, it would be worth it.

 

[ZoomZoomBoomBoom]

Even better if you were order a couple hundred Cliffy lane protectors and had them available!
Shipping is always a massive cost increase so even if you charged a solid premium for each one, it would be worth it.

Last I spoke to Cliffy it would take him 16 years to fulfill my order.
I'm not joking,..

 

[Chris Bardon]

That STL seems to print OK if you add a raft to it. Haven't put this in a game yet, but I'm curious how it holds up in PLA. Seems like it would crack. Also need to sand down any roughness on the print to make sure that it doesn't scratch the balls and cause more damage than it prevents.

 

[luch]

bring it tonight , i'll test drive it for you

 

[zebulon]

They do need a brim, most I've tried to print at once is a 3 pack which takes 1hr10minutes to accomplish.
PLA probably will be too brittle, PLA+ is probably the way to go. TPU is way too flexible to get a good print from and PETG is too stringy.

 

[BMHouze]

Always on the hunt for Secret Santa stuff for this coming year.
I will be looking to buy at Pinfest

Will be looking around for all kinds of SS stuff at Pinfest

 

[ritewhereiwant2b]

Yeah, id put these on all my machines...