I just added a home made mod on my TZ, I was planning to add a Clock Millions mod from the beginning that I bought my TZ but these Mods on Ebay are a little too pricy for me.
One is 160$ CAD with shipping and the other is more than 200$ CAD with shipping, plus, they are not made of solid brass like the ones that were sold about 15 years ago, they look cheap, I remember buying one of solid shiny brass for a TZ I had 15 years ago.
So I decided to make my own, I bought this solid brass pocket watch housing off Ebay for only 35$ CAD with shipping:
and a small solid brass bell off Marketplace I paid 5$ on which I cut the top part of the bell to get a miniature bell.
I printed this from Marco's and zoomed it really smaller (4 cm diameter) and added the missing numbers, 3 , 6, 9, and 12 with numbers I found on the net and printed.
https://www.marcospecialties.com/pinball-parts/31-1751-3P
I cut a small round piece of policarbonate to make the clock glass, I polished everything before building it and added a LED behind the paper, connected to the clock millions lamp.
I'm quite happy with the results and it's shiny and nicer the the ones on Ebay.
TWILIGHT ZONE Pinball *Ultimate* !! Motorised Finger!! CLOCK Millions Mod TZ | eBay
Motorised Rotating Finger! All hand crafted from beginning to end, this mod is super high quality and is aMUST HAVE addition to your amazing pin! TWILIGHT ZONE PINBALL. The mod plugs directly into the pinball.
www.ebay.com
TWILIGHT ZONE PINBALL CLOCK MILLIONS [ flipper machine MOD] | eBay
TWILIGHT ZONE PINBALL - CLOCK MILLIONS.
www.ebay.com
One is 160$ CAD with shipping and the other is more than 200$ CAD with shipping, plus, they are not made of solid brass like the ones that were sold about 15 years ago, they look cheap, I remember buying one of solid shiny brass for a TZ I had 15 years ago.
So I decided to make my own, I bought this solid brass pocket watch housing off Ebay for only 35$ CAD with shipping:
GreROSKOPF PATENT Case from Swiss Vintage Pocket Watche | eBay
For spare parts. There are slight scuffs and deformations. Good luck friends.
www.ebay.com
and a small solid brass bell off Marketplace I paid 5$ on which I cut the top part of the bell to get a miniature bell.
I printed this from Marco's and zoomed it really smaller (4 cm diameter) and added the missing numbers, 3 , 6, 9, and 12 with numbers I found on the net and printed.
https://www.marcospecialties.com/pinball-parts/31-1751-3P
I cut a small round piece of policarbonate to make the clock glass, I polished everything before building it and added a LED behind the paper, connected to the clock millions lamp.
I'm quite happy with the results and it's shiny and nicer the the ones on Ebay.
Attachments
Last edited:
