Hey everyone,
I could really use your advice on my White Water playfield! The artwork is mostly intact, but it’s showing some fading, and there’s a small worn spot that needs attention. The playfield itself has some uneven areas, and a few inserts are raised, which is a bit concerning.
I’m considering a few options and would love to hear your thoughts:
1. Keep it simple: Clean it up and play it as is—sometimes a little wear adds character!
2. DIY project: Strip it down, give it a thorough clean, level the inserts, and tackle a clear coat myself. I’m a bit nervous about the clear coat and leveling, though—never done that before!
3. Get a pro involved: Strip it and find someone experienced to handle the inserts and clear coat. Plus, I might get to learn a few tricks along the way!
What do you think? Any advice or experiences you can share would be super helpful!
Let me know if you’d like any further tweaks!
I could really use your advice on my White Water playfield! The artwork is mostly intact, but it’s showing some fading, and there’s a small worn spot that needs attention. The playfield itself has some uneven areas, and a few inserts are raised, which is a bit concerning.
I’m considering a few options and would love to hear your thoughts:
1. Keep it simple: Clean it up and play it as is—sometimes a little wear adds character!
2. DIY project: Strip it down, give it a thorough clean, level the inserts, and tackle a clear coat myself. I’m a bit nervous about the clear coat and leveling, though—never done that before!
3. Get a pro involved: Strip it and find someone experienced to handle the inserts and clear coat. Plus, I might get to learn a few tricks along the way!
What do you think? Any advice or experiences you can share would be super helpful!
Let me know if you’d like any further tweaks!
